BDL | Item Constant Climate Chambers HPP750 life for keeping mice

My cart

My Quotes

Webshop A-B Search

My cart

My Quotes

Constant Climate Chambers HPP750 life for keeping mice

Memmert (1006)

Constant Climate Chambers HPP750 life for keeping mice
Standard equipment :
-forced ventilation by Peltier fan
-2 fresh air inlets (40 mm ? ) in the rear at the bottom, can be closed with stopper
-1 exhaust air outlet in the rear at the top (80 mm ?) with fan, to control the air exchange rate, adjustable in 10 % steps (max. air exchange rate 38 times/h)
-adaptive multifunctional digital PID-microprocessor controller with 2 highdefinition TFT-colour displays
-integral fault diagnostics for temperature and humidity control
-2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
-digital timer adjustable from 1 minute to 99 days
-SetpointWAIT function - the process time does not start until the set temperature is reached
-AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
-heating and cooling performance distribution by individual control of the Peltier elements in the upper and lower row
-HeatBALANCE function for adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
-resolution of display for setpoint and actual temperature values 0.1°C
-calibration facility directly at ControlCOCKPIT for three freely selectable temperature values, 2-point calibration for humidity: 20 and 90 % rh
-programme stored in case of power failure
-including works calibration certificate for +30°C/45 % rh

-active humidifying and de-humidifying adjustable from 10 - 90 % rh with digital display of relative humidity - resolution of display 0.1 %, setting accuracy 0.5 %
-dehumidification by means of compressed air for safe and stable humidity values in compliance with GV Solas guidelines
-humidity supply with distilled water from external tank by self-priming pump
-humidification by hot steam generator
-dehumidification by cold trap using the Peltier technology

-multiple Overtemperature Protection, with audible and visual alarm, over- and undertemperature monitor, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, additionally integrated over- and undertemperature protection "ASF", alarm in case of over or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature

-textured Stainless Steel Casing (rear zinc-plated steel)
-fully insulated stainless steel doors with 2-point locking (compression door lock)
-inner glass doors

-energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
-2 special stainless steel grids, reinforced, each with 2 LED light strips, adjustable in 1 % steps (6.500 K cold white or 2.700 K warm white)
Setting temperature range: 0 °C to +35 °C
Working-temperature range: +5 °C to +40 °C with light

PN	Manuf. PN	Supplier	Capacity		PK	Type	Housing (W x D x H)	LC	Rating	Shelf support ribs/shelves	Weight	Internal dimensions (W x D x H)		General	Price	Quantity	Status	Add
6263247	HPP750LIFE	Memmert	749		1	HPP750 life	1224 x 874** x 1726	1	1200	4/2	208	1040 x 600* x 1200			Inquire